FLAT WEBBING SLING ROUND WIRE MALE RINGS – B 4 TYPE

These category 4 flat webbing slings are widely used in the fields of construction, public works, building. They have two male round wire rings at each end. We manufacture them up to 20 T according to EN 1492-1+A1 standard.

The range benefits

Traceability is guaranteed by the traceability label.
Galvanized rings for increased lifespan.
100 % high tenacity polyester fiber webbing and sewing thread: high resistance to friction, abrasion, UV and chemical products.

Our advantages

Customization available

French manufacturer guarantee

About this product

Polyester provides high resistance to friction, abrasion, UV and chemical products.
B-type flat webbing sling (double ply) with two male round wire rings (category 4).
Be careful, according to standard EN 1492-1+A1, make sure to always protect your slings if used in a lifting configuration with sharp angles. A wide range of protections is available: polyurethane, PVC or leather sleeve, polyurethane protection keeper, etc.
Contact us to know the other optional materials available for ends reinforcement. For smaller lifting capacities, use B-type slings (double ply).
For lifting capacities higher than 20 tons, use C-type slings (4 plies).

Request a quotation

Call an advisor

Features
Download center

Features

Reference	SPB4
Min WLL	0,5 T
Max WLL	20 T
Safety factor	4:1 for the whole set (the webbing keeps a safety factor of 7:1)
Standard	EN 1492-1+A1
Material	100% high tenacity multifilament polyester
Min webbing width	30 mm
Max webbing width	300 mm
Thickness	6 to 8 mm
Configuration	B-type: 2 plies
Category	2 round wire male rings (cat. 4)
Min effective working length	0,8 m
Max effective working length	100 m
Weight 1st m	From 650 up to 17500 g
Weight linear meter	From 200 up to 2250 g
Operating temperature	From - 40°C up to + 100°C
Colour	According to WLL: 1 T purple, 2 T green, 3 T yellow, 10 T and more orange

Download center

Document #1

Schéma / Visuels

HIGH CAPACITY FLAT WEBBING SLING ROUND WIRE MALE RINGS - C 4 TYPE

These high-capacity flat webbing slings (up to 40 T) are manufactured according to EN 1492...

Find out more

Important information

Your safety depends on the proper use of your product. Refer to the user manual supplied with the equipment.
Depending on your needs and / or your site, we can pair your slings to guarantee them the same length.
Data such as weight are given for information purpose only and may be changing depending on the manufacturing method and the raw material sourcing.
We can test our production up to the highest capacities in our laboratory with fatigue or static under proof load tests.