FLAT WEBBING SLING REINFORCED EYES – B 1 TYPE

These B-type (double ply) category 1 flat webbing slings are manufactured up to 20 T according to EN 1492-1+A1 standard. They have classic reinforced eyes.

The range benefits

Traceability is guaranteed by the traceability label.
Regular eyes: textile reinforcement.
100 % high tenacity polyester fiber webbing and sewing thread: high resistance to friction, abrasion, UV and chemical products.

Our advantages

Customization available
French manufacturer guarantee

About this product

B-type flat webbing sling (double ply) with two reinforced classic eyes (category 1).
Be careful, according to standard EN 1492-1+A1, make sure to always protect your slings if used in a lifting configuration with sharp angles. A wide range of protections is available: polyurethane, PVC or leather sleeve, polyurethane protection keeper, etc.
Contact us to know the other optional materials available for ends reinforcement. For smaller lifting capacities, use B-type slings (double ply).
For lifting capacities higher than 20 tons, use C-type slings (4 plies).
  • Features

  • Download center

Features

ReferenceSPB1
Min WLL0,5 T
Max WLL20 T
Safety factor7:1
StandardEN 1492-1+A1
Material100% high tenacity multifilament polyester
Min webbing width25 mm
Max webbing width300 mm
Thickness5,1 to 8 mm
ConfigurationB-type: 2 plies
CategoryReinforced eyes (cat. 1)
Min effective working length0,5 m
Max effective working length100 m
Weight 1st mFrom 180 up to 3700 g
Weight linear meterFrom 150 up to 2250 g
Operating temperatureFrom - 40°C up to + 100°C
ColourAccording to WLL: 1 T purple, 2 T green, 3 T yellow, 5 T red… 10 T and more orange

Download center

Schéma / Visuels

Important information

Your safety depends on the proper use of your product. Refer to the user manual supplied with the equipment.
Depending on your needs and / or your site, we can pair your slings to guarantee them the same length.
Data such as weight are given for information purpose only and may be changing depending on the manufacturing method and the raw material sourcing.
We can test our production up to the highest capacities in our laboratory with fatigue or static under proof load tests.

You might like these products

Choosing PMS also means:

Choosing a French manufacturer

Quick delivery

Personnalized support

Any question?