FLAT WEBBING SLING OXYCUT MALE RINGS – B 6 TYPE
These category 6 flat webbing slings are widely used in the metallurgical industry. They have two male oxycut rings at each end. We manufacture them up to 20 T according to EN 1492-1+A1 standard.
The range benefitsTraceability is guaranteed by the traceability label. 100 % high tenacity polyester fiber webbing and sewing thread: high resistance to friction, abrasion, UV and chemical products.
About this productB-type flat webbing sling (double ply) with two oxycut male rings (category 6). Be careful, according to standard EN 1492-1+A1, make sure to always protect your slings if used in a lifting configuration with sharp angles. A wide range of protections is available: polyurethane, PVC or leather sleeve, polyurethane protection keeper, etc. Contact us to know the other optional materials available for ends reinforcement. For smaller lifting capacities, use B-type slings (double ply). For lifting capacities higher than 20 tons, use C-type slings (4 plies).
|Min WLL||0,5 T|
|Max WLL||20 T|
|Safety factor||4:1 for the whole set (the webbing keeps a safety factor of 7:1)|
|Material||100% high tenacity multifilament polyester|
|Min webbing width||30 mm|
|Max webbing width||300 mm|
|Configuration||B-type: 2 plies|
|Category||2 oxycut male rings (cat. 6)|
|Min effective working length||1 m|
|Max effective working length||100 m|
|Weight 1st m||From 6100 up to 28750 g|
|Weight linear meter||From 800 up to 2250 g|
|Operating temperature||From - 40°C up to + 100°C|
|Colour||According to WLL: 1 T purple, 2 T green, 3 T yellow, 10 T and more orange|