These category 7 flat webbing slings are conceived for tie-lifting with their male and female oxycut rings at each end. We manufacture them up to 20 T according to EN 1492-1+A1 standard.

Les + de la gamme

The male ring slides perfectly into the female one and makes it possible to lift the load without boring or folding the sling.
Traceability is guaranteed by the traceability label.
100 % high tenacity polyester fiber webbing and sewing thread: high resistance to friction, abrasion, UV and chemical products.
Polyester provides high resistance to friction, abrasion, UV and chemical products.

Nos avantages

Customization available
French manufacturer guarantee

Concernant ce produit

B-type flat webbing sling (double ply) with two oxycut male and female rings (category 7).
Be careful, according to standard EN 1492-1+A1, make sure to always protect your slings if used in a lifting configuration with sharp angles. A
wide range of protections is available: polyurethane, PVC or leather sleeve, polyurethane protection keeper, etc.
Contact us to know the other optional materials available for ends reinforcement.
  • Caractéristiques

  • Centre de téléchargement


CMU mini0,5 T
CMU maxi20 T
Coefficient d'utilisation4:1 for the whole set (the webbing keeps a safety factor of 7:1)
NormeEN 1492-1+A1
Matière100% high tenacity multifilament polyester
Largeur de sangle mini30 mm
Largeur de sangle maxi300 mm
Epaisseur7 to 8 mm
ConfigurationB-type: 2 plies
Catégorie1 male and 1 female oxycut ring (cat. 7)
Longueur utile mini1 m
Longueur utile maxi100 m
Poids 1er mFrom 7400 up to 30750 g
Poids m/lFrom 800 up to 2250 g
Température d'utilisationFrom - 40°C up to + 100°C
CouleurAccording to WLL: 1 T purple, 2 T green, 3 T yellow, 10 T and more orange

Centre de téléchargement

Schéma / Visuels

Important information

Your safety depends on the proper use of your product. Refer to the user manual supplied with the equipment.
Depending on your needs and / or your site, we can pair your slings to guarantee them the same length.
Data such as weight are given for information purpose only and may be changing depending on the manufacturing method and the raw material sourcing.
We can test our production up to the highest capacities in our laboratory with fatigue or static under proof load tests.

Choisir PMS c’est aussi:

Choisir un acteur français

Livraison rapide

Suivi personnalisé

Une question ?