OVERCENTER BUCKLE WITH LONG HANDLE FA – COVERING LC 1600 daN

These lashing systems with overcenter buckle with long handle are intended for interior lashing with a 45 mm wide webbing. They have a covering LC of 1 600 daN – 3 T (breaking strength of the webbing only 3 T or 3000 daN). With an overcenter buckle the webbing needs to be manually pre- tensioned and goes through the buckle’s handle. The webbing is tight once the handle has been tilted and locked on the vehicle frame.

The range benefits

Long handle: better grip and ease of tensioning the webbing.
Customized manufacturing possible: specific length, identical or different fittings…
Comply with EN 12 195-2 standard.
Traceability is guaranteed by the traceability label.
100 % high tenacity polyester fiber webbing and sewing thread: high resistance to friction, abrasion, UV and chemical products.

Our advantages

Customization available
French manufacturer guarantee

About this product

Regular product: effective working length 3,50 m, green webbing.
Additional meter weight: 80 g.
Internal range ref: 4A.

This range is available with:
- Overcenter buckle (ref. 912, internal ref 4B),
- A ratchet (ref. 916, internal ref 4C).

Depending on your use, a wide range of protections is available: polyurethane or PVC sleeve, polyurethane protection keeper, etc.
  • Features

  • Download center

Features

ReferenceFA
Direct LC 800 daN
Covering LC1600 daN
Breaking strength of the webbing only3 T
StandardEN 12195-2
Material100% high tenacity multifilament polyester webbing, steel ratchet with painted handle
Webbing width45 mm
Effective working length3,5 m
Short part length1 m
Operating temperatureFrom - 40°C up to + 100°C
EndingsSeveral possibilities

Download center

Schéma / Visuels

2 parts configuration

Ref. (internal ref.)FA/1826 (4A11)
Weight / 3,5 m960 g
Ref. (internal ref.)FA/1827 (4A44)
Weight / 3,5 m920 g

2 parts configuration, covering LC 1500 daN

Ref. (internal ref.)FA/1005 (4A33)
Weight / 3,5 m970 g
OVERCENTER BUCKLE 912 - COVERING LC 1600 daN

OVERCENTER BUCKLE 912 - COVERING LC 1600 daN

These lashing systems with overcenter buckle with long handle are intended for interior la...

Find out more

Important information

Your safety depends on the proper use of your product. Refer to the operating instructions on the product’s label.
Data such as weight are given for information purpose only and may be changing depending on the manufacturing method and the raw material sourcing.
A wide range of protections are available depending on your use: polyurethane or PVC sleeves, polyurethane protection keepers, etc.
We can test our production up to the highest capacities in our laboratory with fatigue or static under proof load tests.

You might like these products

Choosing PMS also means:

Choosing a French manufacturer

Quick delivery

Personnalized support

Any question?