OVERCENTER BUCKLE 912 – COVERING LC 1600 daN
These lashing systems with overcenter buckle with long handle are intended for interior lashing with a 45 mm wide webbing. They have a covering LC of 1 600 daN – 3 T (breaking strength of the webbing only 3 T or 3000 daN). With an overcenter buckle the webbing needs to be manually pre- tensioned and goes through the buckle’s handle. The webbing is tight once the handle has been tilted and locked on the vehicle frame.
The range benefitsCustomized manufacturing possible: specific length, identical or different fittings… Comply with EN 12 195-2 standard. Traceability is guaranteed by the traceability label. 100 % high tenacity polyester fiber webbing and sewing thread: high resistance to friction, abrasion, UV and chemical products.
About this productRegular product: effective working length 3,50 m, green webbing. Additional meter weight: 80 g. Internal range ref: 4B. This range is available with: - Overcenter buckle with long handle (ref. FA, internal ref 4A), - A ratchet (ref. 916, internal ref 4C). Depending on your use, a wide range of protections is available: polyurethane or PVC sleeve, polyurethane protection keeper, etc.
|Direct LC||800 daN|
|Covering LC||1600 daN|
|Breaking strength of the webbing only||3 T|
|Material||100% high tenacity multifilament polyester webbing, steel ratchet|
|Webbing width||45 mm|
|Effective working length||3,5 m|
|Short part length||1 m|
|Operating temperature||From - 40°C up to + 100°C|
Schéma / Visuels
2 parts configuration
|Ref. (internal ref.)||912/1826 (4B11)|
|Weight / 3,5 m||730 g|
2 parts configuration, covering LC 1500 daN
|Ref. (internal ref.)||912/1005 (4B33)|
|Weight / 3,5 m||740 g|