4 LEGS GRADE 80 CHAIN SLING – ECH401, ECH402, ECH403 AND ECH404

Our multi-leg 4-legs chain slings are manufactured in France in accordance with standard EN 818-4+A1. The ends are optionally equipped with self-locking or latch hooks. We can custom manufacture these slings to the nearest centimetre.

The range benefits

Perfectly suited for loads requiring several attachment points.
Grade 80 chain.
Traceability is guaranteed by the marking plate.
Chain diameters from 6 up to 20 mm.

Our advantages

Customization available

French manufacturer guarantee

About this product

Please note that the calculation of the WLL of the sling will be different depending on the number of legs and the lifting angle.
For maximum versatility we can add shortening clutches to shorten the length of the legs (optional).
Consult us for more information and capacities or for any project study.

Request a quotation

Call an advisor

Features
Download center

Features

Reference	ECH400
Number of leg(s)	4
WLL under an angle between 0 to 45°	2,36 to 26,50 T
WLL under an angle between 45 to 60°	1,70 to 19 T
Safety factor	4:1
Standard	EN818-4+A1
Grade	80
Min diameter	6 mm
Max diameter	20 mm
Operating temperature	From - 40 °C up to + 200 °C
Endings	Hook with latch or self locking hook
Options	Shortening clutch

Download center

Document #1

Schéma / Visuels

Endings: hook with latch (ref: ECH401).
With shortening clutch, ref ECH403.

Endings: self locking hook (ref: ECH402).
With shortening clutch, ref ECH404.

Our facilities are equipped to control the slings, replace the defective elements when possible, restore the slings to conformity, test them and issue the corresponding certificate allowing a new commissioning. Repairs or modifications should be carried out by the manufacturer.

4 LEGS GRADE 100 CHAIN SLING - ECH401G1, ECH402G1, ECH403G1 AND ECH404G1

Our multi-leg 4-legs chain slings are manufactured with grade 100 in France. The ends are ...

Find out more

Important information

Your safety depends on the proper use of your product. Refer to the user manual supplied with the equipment.
We have several raw material suppliers, characteristics are given for information purpose only.
We can test our production up to the highest capacities in our laboratory with fatigue or static under proof load tests.