ROUNDSLING DOUBLE SLEEVE AND MIDDLE STITCH – ECM

This range is especially adapted and recommended for lifting metal frames and is also suitable for difficult hoisting.

The range benefits

Thanks to the center stitch, the fibers are more knitted together, the supported force is evenly spread on each one.
100 % high tenacity multifilament polyester (sleeve + core + sewing thread).
Traceability is guaranteed by the traceability label.

Our advantages

Customization available

French manufacturer guarantee

About this product

Depending on your needs and/or your working site, we can evenly adjust your slings lengths.
Be careful, according to standard EN 1492-1+A1, make sure to always protect your slings if used in a lifting configuration with sharp angles. A wide range of protections is available: polyurethane, PVC or leather sleeve, etc.

Request a quotation

Call an advisor

Features
Download center

Features

Reference	ECM
Min WLL	1 T
Max WLL	10 T
Safety factor	7:1
Standard	EN 1492-2+A1
Material	100% high tenacity multifilament polyester
Min diameter of the leg	20 mm
Max diameter of the leg	48 mm
Min effective working length	0,2 m
Max effective working length	80 m
Weight per useable meter	From 0,37 up to 1,90 kg
Operating temperature	From - 40°C up to + 100°C
Colour	According to WLL: 1 T purple, 2 T green, 3 T yellow, 5 T red…

Download center

Document #1

Schéma / Visuels

The middle stitch roundsling benefits from a unique design made from a double sleeve and a double middle stitch with compacted yarns inside the sling. This technique has been approved by many professional workers with metal frames.

Important information

Your safety depends on the proper use of your product. Refer to the user manual supplied with the equipment. Depending on your needs and / or your site, we can pair your slings to guarantee them the same length.
Above a 10 T WLL, switch to the double sleeve side stitched round sling range.
Data such as weight are given for information purpose only and may be changing depending on the manufacturing method and the raw material sourcing.
We can test our production up to the highest capacities in our laboratory with fatigue or static under proof load tests.