CHOKER BELT- CHO
The choker belt is the best solution to strongly hold the pipe: it cannot slide, which ensures a more secured lifting operation. The choker enables you to handle, push and pull the pipe with more accuracy than with a webbing. Thanks to our partnership with local industrial players, this product is 100% made in France.
The range benefitsEasy and quick installation. Easy guidance during the handling operation. Allow to make a rotation of the pipe for a precise handling. Automatic tightening, perfect hooping: thanks to the polyurethane coating the pipe is not damaged. To fit the exact size of the pipe, the locking system can be adjusted with an extreme accuracy. Safety: high resisting design without supporting welding. Long-term investment: long lifespan of the equipment made with high resisting materials.
French manufacturer guarantee
About this productTraceability on each dismantled part. Possibility to change some components. The wire rope slings used for lifting the choker can be replaced with textile round slings to lighten the lifting device or chain slings for a more flexible use. Possibility to make rotations easily to facilitate the welding work around the pipe. Consult us for more information and capacities or for any project study.
|Min WLL||4 T|
|Max WLL||13 T|
|Min diameter||305 (12 inches) mm|
|Max diameter||1625 (64 inches) mm|
Schéma / Visuels
To increase the bearing surface on the pipe, it is possible to fasten together two chokers with the same properties.
The locking system adjustment is very precise to adapt to the pipe’s exact dimensions.
The handle can be opened to enable a visual control of the wire rope (option).
If you need to lighten your lifting device, you can switch wire rope slings to textile slings. You can also switch to chain sling to increase the flexibility of the device.